Turn Pants into a Skirt

Do you have a pair of pants that just plain looks good on your "hind end", but are too long, too flared, or full of holes? Here's a solution :). 

Making a skirt out of pants is so easy, and works for ANY size.

If you want to repurpose some of the old pants in your home, here are the simple steps:

Measure at least 2 inches longer than the desired length... to hem, and just to be safe.

Make sure to keep the part that's cut off!! You'll need it later.

This part takes the longest. Watch an episode of your favorite tv show while you do this.

Do this for both the front and back.

Now for the sewing:

Of course, repeat these steps for both the front and back.

Trim off excess length. As seen in the picture above, there is an interesting line in the middle. I had to keep that on to make sure the skirt was long enough, but trimmed most of it off at this part.

Hem: fold under 1/4 inch and iron. Then fold under 1/2 inch. Sew as close to the edge all the way around. ** Note: depending on how the pants are made, you may have to adjust this part to whatever works!

Trim off the extra fabric on the inside of skirt.

Press and you're done!

XO,
~ Nancy

Linking to:
Thursday Favorite Things   Creative Juice   Catch a Glimpse
Redfly Creations One Artsy Mama   Tidy Mom
My Name is Rita   Six Sisters' Stuff  This Gal Cooks  Mad in Crafts  Craft-O-Maniac
Creating my way to Success Upcycle Link Party

Reupholstering Your Dining Chairs

Finished Product

Furniture shopping can be overwhelming. One must consider many questions while battling a relentless barrage of helpful, smiling salesfolk. Will the new piece match my existing decor? Is it made of used packaging peanuts and will fall apart next year? Should I get this or 29 new shirts instead? Difficult. When we decided that our current dining set was in need of upgrading, we went to the store where my husband shopped while I raced around 12,000 square feet of toddler hiding heaven. Once he found the one pictured above (scratch and dent, good deal) he asked my approval. I nodded, seeing how it had four good legs and chairs and then raced off after the screams of delight that only a good chase can produce. 

When we got them home I found, much to my dismay that these chairs had FABRIC seats. Nooooooo! Why must the furniture fates conspire against me once again? Our last set had fabric seats and were a magnet for every grape drink and over-ripe strawberry in the county. My new set giving me equal if not more distress? This could not be. 

That's why in times of freak-outage, God in his great wisdom gave us friends. Wonderful Jenn said, "You know what? I bet it would be easy to recover those." With her encouragement and support I decided, yes I would take on this challenge because 20 years of dealing with dining anxiety when there are "real" problems in the world, just isn't worth it. 

I checked out a couple videos on YouTube (the one I linked is a good one. I'm not just linking to YouTube) and if you've never recovered anything before you definitely should watch some too. Here are the basic steps they taught me: 

1. Turn your chair upside down and unscrew the screws holding the chair pad to the chair. This part was easy, willing me to believe that the rest would be too. Ha ha ha so naive. 

2. Cut out your fabric so you've got at least four inches or so on the straight sides and six or so on the curvy ones. (If you have curvy chairs like I do) The chairs on the Tube tutorials were all straight sides so that is my excuse for why mine look a little crappy.

3. Staple one side in the middle of your chair pad and use all your hand strength to pull it taut on the opposite side and staple that side in the middle. Proceed to put one staple in each side.

4. Begin stapling the edges leaving a few inches around the corners. Make sure that you pull the fabric as tight as you can so you'll have a nice smooth surface on the other front side.

5. Once you're done with the sides you've got your malicious corners to deal with. I found this was kind of like wrapping a present. You want to get as many wrinkles out by smoothing the sides and getting them to fold on the bottom side of the pad. Use approximately 93 staples on each corner until every fold is nailed down. 

6. Trim the excess from the pad and flip it over to reveal you're beautiful handiwork. Screw it back into your chair and you're done. It just took a bruised staple hand, a few curses and some time but you did it! Now I can rest assured that all little wobbly hands are welcome at my table.  

I think the biggest thing I learned out of this project is that you can do anything. Really. What looks so hard and impossible can be achieved once you take the time to learn, break it down to easy steps and shove all your negative voices out the door. 

Have fun!

Maren

Linking to:

Redfly Creations   One Artsy Mama   Tidy Mom  This Gal Cooks Mad in Crafts  Craft-O-Maniac